DK380C4.0-H8 is a designation of an industrial controller or an industrial automation part. It can be likened to the brain of a machine in that it organizes and coordinates processes that go on in a factory and heavy equipment, ensuring that everything is done smoothly and at an efficient rate, with the use of less energy. This is most usually seen in large equipment in factories, CNC environments, or complex control systems rather than in home electronics.
What is DK380C4.0-H8?
So, now, we can take a look at what each part may mean.
- DK380: This is the entry level, probably it is the basic model or series.
- C4.0: Likely to be some kind of version: possibly 4.0.
- H8: An anomalous hardware or regional version may be signaled by a variation code.
Key Highlights And Specifications Of DK380C4.0-H8
In several studies, there is a small (but powerful) control module powered by an H8 CPU.
Memory & Processor
- H8 microprocessor is 80MHz and 32-bit.
- 4Mb flash memory, 512K RAM, and 128K EEPROM.
Performance
- Quick response time (effective about 100us even at a peak load).
- Supports up to 64 processes at one time.
Power & Heat
- It consumes about 4.2W at maximum speed.
- Operates in severe environments with -20 to 60 o C temperature.
Size And Design
Compact design saves up to 40 percent of floor area over former units.
Integrated coolers create a 25 percent reduction in the need to use air-coolers, and meanwhile, only 15 percent less energy is used.
Ports And Connections
DK380C4.0-H8 controller is connected to many devices and networks.
- 2x Ethernet (10/ 100Mbps)
- RS-232/485 has 4x serial ports.
- 2x USB 2.0 and 1x type CAN.
- Moreover, it can handle several different communication technologies such as Modbus TCP, ProfiNET, EtherCAT, OPC UA, or MQTT.
This implies that it can easily be able to talk to multiple devices and systems.
Space And Installation Requirements Of DK380C4.0-H8
- Requires at a minimum, 600 x 700 mm of floor space.
- Keep a minimum of 800mm in the front and 500mm in the vicinity of the panels.
- On the 400mm to leave space in the air, and 750mm above it.
Real-Life Performance
As real-life testing shows:
- Minimally handles a simultaneously running 64 jobs with one hundred percent success.
- Processes an average of 1,000 I/O operations per second and does so with virtually accurate 99.99 percent of the time.
- DK380C4.0-H8 has fast control loop execution (250 u s/PID).
- DK380C4.0-H8 has a full-duplex of 100 Mbps Ethernet.
Common Uses Of DK380C4.0-H8
It is this situation where DK380C4.0-H8 really excels.
- Assembly lines – control robotic operations.
- Quality checks – allows real-time visioning.
- Motion systems – synchronize multiple servos.
- Process tracking – Tracks the data and steps of production.
- Due to temperature control, it is possible to manage heating zones precisely.
- Material movement – The controls control the conveyor systems and the safety machinery.
It regulates torque and speed in CNC machines during milling, drilling, and cutting.
Know The Benefits Of DK380C4.0-H8
Compact Design
- The smaller size takes up less space, leaving room in the house to be filled by other devices.
- It is economical to install, cool, and maintain.
- Power saving- uses less power and cools itself well.
Compatibility And Relating Expansion
- Module additions are easily performed, such as the I/O or custom modules, using the modular design.
- Compatible with the industrial standards.
- It has LEDs and diagnostics to conduct real-time observation.
Support And Maintenance
- Offers available help and instructions twenty-four hours a day.
- Does VPN diagnosis from a remote location.
- Power supply, I/O cards spares are freely obtainable.
- It is accompanied by multimeters, thermal cameras, and pre-care instructions.
Industry Real-Life Applications
It is used in heavy-duty equipment and motor control systems. In some literature, it is used by name when talking about motors in large apparatus. Although this is not common knowledge among consumers, it is well known to the automation engineers.
What Does Various Tech Blogs Say About DK380C4.0-H8
- It is a niche industrial product, which is scattered due to the lack of information.
- It is not, as some people call it, a brain or a controller.
- The others give specifications in detail with actual data.
- It is claimed that it is just a generic model name having vague data.
- The detailed specifications are most likely taken from authentic manuals or product papers. Simpler descriptions help newcomers learn the fundamentals.
Final Words
At its core, the DK380C4.0-H8 is a smart, compact industrial controller designed to accelerate automation, save energy, and precisely control complicated activities. Its adaptable design, current connection, and confidence in production situations make it a solid choice for automation planners.
It is not a home item, but rather a professional tool in industries such as automotive, electronics, pharmaceuticals, and metalworking.
FAQs – Frequently Asked Questions
1. Is DK380C4.0-H8 A Computer Chip?
Not quite. It’s more of a whole controller unit, including the processor, memory, and I/O ports.
2. Who Uses DK380C4.0-H8?
Factory engineers, automation system builders, CNC machinists, and anyone who needs a compact automation brain.
3. Can I Add Additional Features For DK380C4.0-H8?
Yes! It’s modular, so you may add extra I/O or specialty modules as needed.
4. How Long Will DK380C4.0-H8 Last?
There is no exact number, but with proper maintenance, industrial equipment like this can endure for years.
Also Know About: Improve DH58GOH9.7 Software
